электроэнергетика (страница 3)

Автор: Virginie Viallet

Since the 90s, the Li-ion batteries are the most commonly used energy storage systems. The demand for performance and safety is constantly growing, current commercial batteries based liquid electrolytes or gels may not be able to meet the needs of emerging applications such as for electric and hybrid vehicles and renewable energy storage , and it is therefore necessary to develop advanced storage systems with characteristics such that the highest density of energy technology, long life, low cost of production, little or no maintenance and high safety of use. Batteries «all solid» are a technology of choice to meet these requirements. In this technology, the electrolyte separator between the two electrodes is no longer a liquid medium but a solid.

Купить

Автор: Christian Laurence

The Lewis concept of acids and bases is discussed in every general, organic and inorganic chemistry textbook. This is usually just a descriptive treatment, as it is not possible to devise a single numerical scale suitable for all occasions. However quantitative Lewis acid-base chemistry can be developed by compiling reaction-specific basicity scales which can be used in specific branches of chemistry and biochemistry. Lewis Basicity and Affinity Scales: Data and Measurementbrings together for the first time a comprehensive range of Lewis basicity/affinity data in one volume. More than 2400 equilibrium constants of acid-base reactions, 1500 complexation enthalpies, and nearly 2000 infrared and ultraviolet shifts upon complexation are gathered together in 25 thermodynamic and spectroscopic scales of basicity and/or affinity. For each scale, the definition, the method of measurement, an exhaustive database, and a critical discussion are given. All the data have been critically examined; some have been re-measured; literature gaps have been filled by original measurements; and each scale has been made homogeneous. This collection of data will enable experimental chemists to better understand and predict the numerous chemical, physical and biological properties that depend upon Lewis basicity. Chemometricians will be able to apply their methods to the data matrices constructed from this book in order to identify the factors which influence basicity and basicity-dependent properties. In addition, measured experimental basicities and affinities are essential to computational chemists for the validation, calibration and establishment of reliable computational methods for quantifying and explaining intermolecular forces and the chemical bond. Lewis Basicity and Affinity Scales: Data and Measurement is an essential single-source desktop reference for research scientists, engineers, and students in academia, research institutes and industry, in all areas of chemistry from fundamental to applied research. «The book is a noteworthy piece of work and represents a timely and vast accumulation of knowledge regarding Lewis bases that brings together accurate thermodynamic and spectroscopic data on typical reference Lewis acids. As such, it should serve as a useful and general guide to basicity.» J. AM. CHEM. SOC. 2011, 133, 642

Купить

Автор: Nicholas Sakellariou

Energy and sustainability are two of the most important and often most misunderstood subjects in our world today. As these two subjects have grown in importance over the last few decades, interest in the Life Cycle Assessment (LCA) model has grown as well, as a potentially crucial tool in understanding and striving towards sustainability in energy systems. Not just wind and solar systems, but all energy systems, need to be understood through this model. Wind and solar power have the potential to decentralize the U.S. energy system by offering local communities electricity and economic support, depending on the scale and design of projects. Nevertheless, every energy technology potentially faces environmental costs, lay and expert opposition, and risks to public health. Engineers play a central role as designers, builders, and operators in energy systems. As they extend their expertise into electrical, mechanical and chemical fields, from fossil fuel-based systems to renewable energy systems, “sustainability” is steadily becoming one of the key criteria engineers apply in their work. This groundbreaking new study argues that engineering cultures foster sustainability by adopting assumptions and problem-solving practices as part of their identities when designing and building engineering projects. This work examines the politics of creating, utilizing, and modifying Life Cycle Assessment (LCA) in the construction of renewable energy systems. The only volume of its kind ever written, it is a must-have for any engineer, scientist, manager, or other professional working in or interested in Life Cycle Assessment and its relation to energy systems and impact on environmental and economic sustainability.

Купить

Автор: Группа авторов

Literary Theory: A Practical Introduction, Third Edition, presents a comprehensive introduction to the full range of contemporary approaches to the study of literature and culture, from formalism, structuralism, and historicism to ethnic, gender, and science studies. Introduces students to a variety of contemporary approaches to the study of literature and culture Demonstrates how the varying perspectives on texts can lead to different interpretations of the same work Features numerous updates that include new literary texts, new and expanded sections Represents the ideal accompaniment to the upcoming Third Edition of Literary Theory: An Anthology

Купить

Автор: Peter Curtis M

This book is meant to offer Architects, Property Mangers, Facility Managers, Building Engineers, Information Technology Professionals, Data Center Personnel, Electrical & Mechanical Technicians and students in undergraduate, graduate, or continuing education programs relevant insight into the Mission Critical Environment with an emphasis on business resiliency, data center efficiency, and green power technology. Industry improvements, standards, and techniques have been incorporated into the text and address the latest issues prevalent in the Mission Critical Industry. An emphasis on green technologies and certifications is presented throughout the book. In addition, a description of the United States energy infrastructure's dependency on oil, in relation to energy security in the mission critical industry, is discussed. In conjunction with this, either a new chapter will be created on updated policies and regulations specifically related to the mission critical industry or updates to policies and regulations will be woven into most chapters. The topics addressed throughout this book include safety, fire protection, energy security and data center cooling, along with other common challenges and issues facing industry engineers today.

Купить

Автор: Pushkar Mehra

The Manual of Minor Oral Surgery for the General Dentist, Second Edition continues the aim of providing clear and practical guidance to common surgical procedures encountered in general practice. Fully revised and updated with three additional chapters, the book approaches each procedure through detailed, step-by-step description and illustration. Ideal for general dental practitioners and students, the book is an indispensible tool for planning, performing, and evaluating a range of surgical procedures in day-to-day practice. The Manual of Minor Oral Surgery for the General Dentist begins with an expanded chapter on patient evaluation and history taking and a new chapter on managing the patient with medical comorbidities. It also address infections and sedation besides procedural chapters on such topics as third molar extractions, preprosthetic surgery, surgical implantology, crown-lengthening, and biopsy of oral lesions.

Купить

Автор: Wilson Chin C

Trade magazines and review articles describe MWD in casual terms, e.g., positive versus negative pulsers, continuous wave systems, drilling channel noise and attenuation, in very simple terms absent of technical rigor. However, few truly scientific discussions are available on existing methods, let alone the advances necessary for high-data-rate telemetry. Without a strong foundation building on solid acoustic principles, rigorous mathematics, and of course, fast, inexpensive and efficient testing of mechanical designs, low data rates will impose unacceptable quality issues to real-time formation evaluation for years to come. This all-new revised second edition of an instant classic promises to change all of this. The lead author and M.I.T.-educated scientist, Wilson Chin, has written the only book available that develops mud pulse telemetry from first principles, adapting sound acoustic principles to rigorous signal processing and efficient wind tunnel testing. In fact, the methods and telemetry principles developed in the book were recently adopted by one of the world’s largest industrial corporations in its mission to redefine the face of MWD. The entire engineering history for continuous wave telemetry is covered: anecdotal stories and their fallacies, original hardware problems and their solutions, different noise mechanisms and their signal processing solutions, apparent paradoxes encountered in field tests and simple explanations to complicated questions, and so on, are discussed in complete “tell all” detail for students, research professors and professional engineers alike. These include signal processing algorithms, signal enhancement methods, and highly efficient “short” and “long wind tunnel” test methods, whose results can be dynamically re-scaled to real muds flowing at any speed. A must read for all petroleum engineering professionals!

Купить

Автор: Qiuwei Wu

An essential reference to the modeling techniques of wind turbine systems for the application of advanced control methods This book covers the modeling of wind power and application of modern control methods to the wind power control—specifically the models of type 3 and type 4 wind turbines. The modeling aspects will help readers to streamline the wind turbine and wind power plant modeling, and reduce the burden of power system simulations to investigate the impact of wind power on power systems. The use of modern control methods will help technology development, especially from the perspective of manufactures. Chapter coverage includes: status of wind power development, grid code requirements for wind power integration; modeling and control of doubly fed induction generator (DFIG) wind turbine generator (WTG); optimal control strategy for load reduction of full scale converter (FSC) WTG; clustering based WTG model linearization; adaptive control of wind turbines for maximum power point tracking (MPPT); distributed model predictive active power control of wind power plants and energy storage systems; model predictive voltage control of wind power plants; control of wind power plant clusters; and fault ride-through capability enhancement of VSC HVDC connected offshore wind power plants. Modeling and Modern Control of Wind Power also features tables, illustrations, case studies, and an appendix showing a selection of typical test systems and the code of adaptive and distributed model predictive control. Analyzes the developments in control methods for wind turbines (focusing on type 3 and type 4 wind turbines) Provides an overview of the latest changes in grid code requirements for wind power integration Reviews the operation characteristics of the FSC and DFIG WTG Presents production efficiency improvement of WTG under uncertainties and disturbances with adaptive control Deals with model predictive active and reactive power control of wind power plants Describes enhanced control of VSC HVDC connected offshore wind power plants Modeling and Modern Control of Wind Power is ideal for PhD students and researchers studying the field, but is also highly beneficial to engineers and transmission system operators (TSOs), wind turbine manufacturers, and consulting companies.

Купить

Автор: Bin Wu

An invaluable academic reference for the area of high-power converters, covering all the latest developments in the field High-power multilevel converters are well known in industry and academia as one of the preferred choices for efficient power conversion. Over the past decade, several power converters have been developed and commercialized in the form of standard and customized products that power a wide range of industrial applications. Currently, the modular multilevel converter is a fast-growing technology and has received wide acceptance from both industry and academia. Providing adequate technical background for graduate- and undergraduate-level teaching, this book includes a comprehensive analysis of the conventional and advanced modular multilevel converters employed in motor drives, HVDC systems, and power quality improvement. Modular Multilevel Converters: Analysis, Control, and Applications provides an overview of high-power converters, reference frame theory, classical control methods, pulse width modulation schemes, advanced model predictive control methods, modeling of ac drives, advanced drive control schemes, modeling and control of HVDC systems, active and reactive power control, power quality problems, reactive power, harmonics and unbalance compensation, modeling and control of static synchronous compensators (STATCOM) and unified power quality compensators. Furthermore, this book: Explores technical challenges, modeling, and control of various modular multilevel converters in a wide range of applications such as transformer and transformerless motor drives, high voltage direct current transmission systems, and power quality improvement Reflects the latest developments in high-power converters in medium-voltage motor drive systems Offers design guidance with tables, charts graphs, and MATLAB simulations Modular Multilevel Converters: Analysis, Control, and Applications is a valuable reference book for academic researchers, practicing engineers, and other professionals in the field of high power converters. It also serves well as a textbook for graduate-level students.

Купить

Автор: Yu Zhu

This is the first comprehensive monograph that features state-of-the-art multigrid methods for enhancing the modeling versatility, numerical robustness, and computational efficiency of one of the most popular classes of numerical electromagnetic field modeling methods: the method of finite elements. The focus of the publication is the development of robust preconditioners for the iterative solution of electromagnetic field boundary value problems (BVPs) discretized by means of finite methods. Specifically, the authors set forth their own successful attempts to utilize concepts from multigrid and multilevel methods for the effective preconditioning of matrices resulting from the approximation of electromagnetic BVPs using finite methods. Following the authors' careful explanations and step-by-step instruction, readers can duplicate the authors' results and take advantage of today's state-of-the-art multigrid/multilevel preconditioners for finite element-based iterative electromagnetic field solvers. Among the highlights of coverage are: * Application of multigrid, multilevel, and hybrid multigrid/multilevel preconditioners to electromagnetic scattering and radiation problems * Broadband, robust numerical modeling of passive microwave components and circuits * Robust, finite element-based modal analysis of electromagnetic waveguides and cavities * Application of Krylov subspace-based methodologies for reduced-order macromodeling of electromagnetic devices and systems * Finite element modeling of electromagnetic waves in periodic structures The authors provide more than thirty detailed algorithms alongside pseudo-codes to assist readers with practical computer implementation. In addition, each chapter includes an applications section with helpful numerical examples that validate the authors' methodologies and demonstrate their computational efficiency and robustness. This groundbreaking book, with its coverage of an exciting new enabling computer-aided design technology, is an essential reference for computer programmers, designers, and engineers, as well as graduate students in engineering and applied physics.

Купить

Автор: Claire Beeken

This ebook edition of a classic, bestselling autobiography completes Claire Beeken’s powerful story, taking the reader on an inspirational journey to the present day.Claire Beeken first went to hospital with an eating disorder aged 10. For over a decade she locked herself into a vicious cycle of starvation, laxative abuse, binge-eating and vomiting, attempted suicide and periods in a psychiatric hospital.This graphically honest, deeply-affecting, and darkly funny account of Claire’s illness tells the story of an ordinary girl from Luton living life with rare intensity.Since publication of the previous issue, Claire Beeken’s groundbreaking techniques and work with sufferers of eating disorders has come to be internationally recognised. Claire’s charity Caraline is now internationally acclaimed and the help-line that began life in her parents’ front-room has become an established, and enormously successful, care and counselling centre.The updated material tells Claire’s personal story – her feelings and her achievements since the early days of Caraline and also includes further inspirational ‘case histories’ of girls who have recovered from bulimia and anorexia with counselling.

Купить

Автор: Группа авторов

Ceramic Engineering and Science Proceedings Volume 34, Issue 7 – Nanostructured Materials and Nanotechnology VII A collection of 15 papers from The American Ceramic Society’s 37th International Conference on Advanced Ceramics and Composites, held in Daytona Beach, Florida, January 27-February 1, 2013. This issue includes papers presented in the 7th International Symposium on Nanostructured Materials and Nanotechnology (Symposium 7) and Nanomaterials for Sensing Applications symposia (Focused Session 3).

Купить

Автор: Mahmoud El-Halwagi M

A comprehensive review of the current status and challenges for natural gas and shale gas production, treatment and monetization technologies Natural Gas Processing from Midstream to Downstream presents an international perspective on the production and monetization of shale gas and natural gas. The authors review techno-economic assessments of the midstream and downstream natural gas processing technologies. Comprehensive in scope, the text offers insight into the current status and the challenges facing the advancement of the midstream natural gas treatments. Treatments covered include gas sweeting processes, sulfur recovery units, gas dehydration and natural gas pipeline transportation. The authors highlight the downstream processes including physical treatment and chemical conversion of both direct and indirect conversion. The book also contains an important overview of natural gas monetization processes and the potential for shale gas to play a role in the future of the energy market, specifically for the production of ultra-clean fuels and value-added chemicals. This vital resource: Provides fundamental chemical engineering aspects of natural gas technologies Covers topics related to upstream, midstream and downstream natural gas treatment and processing Contains well-integrated coverage of several technologies and processes for treatment and production of natural gas Highlights the economic factors and risks facing the monetization technologies Discusses supply chain, environmental and safety issues associated with the emerging shale gas industry Identifies future trends in educational and research opportunities, directions and emerging opportunities in natural gas monetization Includes contributions from leading researchers in academia and industry Written for Industrial scientists, academic researchers and government agencies working on developing and sustaining state-of-the-art technologies in gas and fuels production and processing, Natural Gas Processing from Midstream to Downstream provides a broad overview of the current status and challenges for natural gas production, treatment and monetization technologies.

Купить

Автор: Olimpo Anaya-Lara

A COMPREHENSIVE REFERENCE TO THE MOST RECENT ADVANCEMENTS IN OFFSHORE WIND TECHNOLOGY Offshore Wind Energy Technology offers a reference based on the research material developed by the acclaimed Norwegian Research Centre for Offshore Wind Technology (NOWITECH) and material developed by the expert authors over the last 20 years. This comprehensive text covers critical topics such as wind energy conversion systems technology, control systems, grid connection and system integration, and novel structures including bottom-fixed and floating. The text also reviews the most current operation and maintenance strategies as well as technologies and design tools for novel offshore wind energy concepts. The text contains a wealth of mathematical derivations, tables, graphs, worked examples, and illustrative case studies. Authoritative and accessible, Offshore Wind Energy Technology: Contains coverage of electricity markets for offshore wind energy and then discusses the challenges posed by the cost and limited opportunities Discusses novel offshore wind turbine structures and floaters Features an analysis of the stochastic dynamics of offshore/marine structures Describes the logistics of planning, designing, building, and connecting an offshore wind farm Written for students and professionals in the field, Offshore Wind Energy Technology is a definitive resource that reviews all facets of offshore wind energy technology and grid connection.

Купить

Автор: Rodney P. Anderson

Outbreak: Cases in Real-World Microbiology, 2nd Edition, is the newest edition of this fascinating textbook designed for introductory microbiology students and instructors. Thoroughly revised, this collection of case studies of real-world disease outbreaks, generously illustrated in full color, offers material that directly impacts college-level students, while the book's unique presentation offers instructors the flexibility to use it effectively in a number of ways. More than 90 outbreak case studies, organized into six sections according to the human body system affected, illustrate the wide range of diseases caused by microbial pathogens. The studies are presented at differing levels of difficulty and can be taught at all undergraduate levels. Each case study includes questions for students to think about, discuss, and answer, and the book includes an appendix that directs students to the specific reference material on which each case was based, providing the opportunity to investigate further and to apply the reference content to the case being studied. Each of the six sections of the book concludes with a College Perspective and a Global Perspective case study. The College Perspective provides a direct and practical link between the microbiology course and the daily lives of students. The Global Perspective connects students with outbreaks that have occurred in countries around the world to facilitate understanding of the social, religious, economic, and political values at play in the treatment and prevention of infectious disease. At the end of every section, detailed descriptions offer concise yet complete information on each disease involved in that section.

Купить

Автор: Mehmet Sankir

This book provides an overall view of the photoelectrochemical systems for solar hydrogen generation, and new and novel materials for photoelectrochemical solar cell applications. The book is organized in three parts. General concepts and photoelectrochemical systems are covered in Part I. Part II is devoted to photoactive materials for solar hydrogen generation. Main focus of the last part is the photoelectrochemical related systems. This part provides a diverse information about the implementation of multi-junctional solar cells in solar fuel generation systems, dye-sensitized solar hydrogen production and photocatalytic formation of photoactive semiconductors.

Купить

Автор: Ryan Mayfield

Купить

Автор: Monika M?ller Freunek

This book provides the reader with a solid understanding of the fundamental modeling of photovoltaic devices. After the material independent limit of photovoltaic conversion, the readers are introduced to the most well-known theory of «classical» silicon modeling. Based on this, for each of the most important PV materials, their performance under different conditions is modeled. This book also covers different modeling approaches, from very fundamental theoretic investigations to applied numeric simulations based on experimental values. The book concludes wth a chapter on the influence of spectral variations. The information is supported by providing the names of simulation software and basic literature to the field. The information in the book gives the user specific application with a solid background in hand, to judge which materials could be appropriate as well as realistic expectations of the performance the devices could achieve.

Купить

Автор: Joe H. Chow

Provides students with an understanding of the modeling and practice in power system stability analysis and control design, as well as the computational tools used by commercial vendors Bringing together wind, FACTS, HVDC, and several other modern elements, this book gives readers everything they need to know about power systems. It makes learning complex power system concepts, models, and dynamics simpler and more efficient while providing modern viewpoints of power system analysis. Power System Modeling, Computation, and Control provides students with a new and detailed analysis of voltage stability; a simple example illustrating the BCU method of transient stability analysis; and one of only a few derivations of the transient synchronous machine model. It offers a discussion on reactive power consumption of induction motors during start-up to illustrate the low-voltage phenomenon observed in urban load centers. Damping controller designs using power system stabilizer, HVDC systems, static var compensator, and thyristor-controlled series compensation are also examined. In addition, there are chapters covering flexible AC transmission Systems (FACTS)—including both thyristor and voltage-sourced converter technology—and wind turbine generation and modeling. Simplifies the learning of complex power system concepts, models, and dynamics Provides chapters on power flow solution, voltage stability, simulation methods, transient stability, small signal stability, synchronous machine models (steady-state and dynamic models), excitation systems, and power system stabilizer design Includes advanced analysis of voltage stability, voltage recovery during motor starts, FACTS and their operation, damping control design using various control equipment, wind turbine models, and control Contains numerous examples, tables, figures of block diagrams, MATLAB plots, and problems involving real systems Written by experienced educators whose previous books and papers are used extensively by the international scientific community Power System Modeling, Computation, and Control is an ideal textbook for graduate students of the subject, as well as for power system engineers and control design professionals.

Купить

Автор: John Ciufo

Купить

Автор: Vincenzo Balzani

In their book Nicola Armaroli, Vincenzo Balzani and Nick Serpone uncover the background details associated with a transition to sustainable energy production that are routinely swept under the table in public discussions. They are not only concerned with the (alleged) advantages and disadvantages of any one energy generation technology from a technical viewpoint, but also with the ecological, economic, political and social consequences of an inevitable transition. In a highly readable manner aimed at an international audience, the authors introduce the often misused and sometimes abused term 'energy' and give a lucid account of the development of energy production from timber to nuclear energy and renewable energies. They compare various energy generation methods with respect to their efficiency and practicability for large-scale implementation and examine if, and how, these methods live up to the expectations and promises their proponents make. In addition, the authors juxtapose the political and economic prerequisites in different regions of the world that advance, or hinder, an energy turnaround. They round off their book by debunking the seventeen most popular myths often cited in discussions on energy issues. As a result, the authors provide ammunition for debate, underpin (and unsettle) opinions using facts, and challenge comfortable and popular chains of reasoning.

Купить

Автор: Erez Cohen

Купить

Автор: Группа авторов

Recurrent Pregnancy Loss Edited by Ole B Christiansen, MD, D.M.Sc., Rigshospitalet, Copenhagen and AalborgUniversityHospital, Aalborg, Denmark Recurrent Pregnancy Loss is a silent problem for many women The spontaneous loss of a pregnancy in the first 22 weeks is often not recorded as the mother needed no medical or surgical treatment. Women who repeatedly suffer this tragedy can go unheard as a result. Gynecologists can feel unable to help. But they can help. Research is showing how to identify women who suffer recurrent pregnancy loss and which treatments might prevent a further recurrence. Gynecologists are learning how to monitor subsequent pregnancies for the early signals of problems. Recurrent Pregnancy Loss provides a practical approach to this hidden clinical challenge. The highly experienced, international author team explores: How to obtain a relevant history Which investigations to order The physiological reasons behind recurrent pregnancy loss The best approach to treatment How to monitor patients in subsequent pregnancies Clinical in approach, practical in execution, with the patient at the centre, Recurrent Pregnancy Loss guides you as you support your patients.

Купить

Автор: Группа авторов

Written by a carefully selected consortium of researchers working in the field, this book fills the gap for an up-to-date summary of the observational and theoretical status. As such, this monograph includes all used wavelengths, from radio to gamma, the FERMI telescope, a history and theory refresher, and jets from gamma ray bursts. For astronomers, nuclear physicists, and plasmaphysicists.

Купить

Автор: Volker V. Quaschning

Купить

Автор: Hassan Bevrani

Discover new challenges and hot topics in the field of penetrated power grids in this brand-new interdisciplinary resource  Renewable Integrated Power System Stability and Control  delivers a comprehensive exploration of penetrated grid dynamic analysis and new trends in power system modeling and dynamic equivalencing. The book summarizes long-term academic research outcomes and contributions and exploits the authors’ extensive practical experiences in power system dynamics and stability to offer readers an insightful analysis of modern power grid infrastructure.  In addition to the basic principles of penetrated power system modeling, model reduction, and model derivation, the book discusses inertia challenge requirements and control levels, as well as recent advances in visualization of virtual synchronous generators and their associated effects on system performance. The physical constraints and engineering considerations of advanced control schemes are deliberated at length.  Renewable Integrated Power System Stability and Control  also considers robust and adaptive control strategies using real-time simulations and experimental studies. Readers will benefit from the inclusion of:  A thorough introduction to power systems, including time horizon studies, structure, power generation options, energy storage systems, and microgrids An exploration of renewable integrated power grid modeling, including basic principles, host grid modeling, and grid-connected MG equivalent models A study of virtual inertia, including grid stability enhancement, simulations, and experimental results A discussion of renewable integrated power grid stability and control, including small signal stability assessment and the frequency point of view Perfect for engineers and operators in power grids, as well as academics studying the technology,  Renewable Integrated Power System Stability and Control  will also earn a place in the libraries of students in Electrical Engineering programs at the undergraduate and postgraduate levels who wish to improve their understanding of power system operation and control.

Купить

Автор: James Aronson

Aimed at Masters, and PhD students, teachers, researchers and natural resource managers, this book explores the interface between restoration ecology and ecological restoration. Covers both the ecological concepts involved in restoration ecology and their practical applications. Written by an excellent group of ecologists from centres across Europe with a strong reputation for restoration ecology. Only textbook around aimed specifically at advanced undergraduate courses and postgraduate study programmes.

Купить

Автор: Guangjin Zhao

A comprehensive guide to the reuse and recycling of lithium-ion power batteries—fundamental concepts, relevant technologies, and business models Reuse and Recycling of Lithium-Ion Power Batteries explores ways in which retired lithium ion batteries (LIBs) can create long-term, stable profits within a well-designed business operation. Based on a large volume of experimental data collected in the author’s lab, it demonstrates how LIBs reuse can effectively cut the cost of Electric Vehicles (EVs) by extending the service lifetime of the batteries. In addition to the cost benefits, Dr. Guangjin Zhao discusses how recycling and reuse can significantly reduce environmental and safety hazards, thus complying with the core principles of environment protection: recycle, reuse and reduce. Offering coverage of both the fundamental theory and applied technologies involved in LIB reuse and recycling, the book's contents are based on the simulated and experimental results of a hybrid micro-grid demonstration project and recycling system. In the opening section on battery reuse, Dr. Zhao introduces key concepts, including battery dismantling, sorting, second life prediction, re-packing, system integration and relevant technologies. He then builds on that foundation to explore advanced topics, such as resource recovery, harmless treatment, secondary pollution control, and zero emissions technologies. Reuse and Recycling of Lithium-Ion Power Batteries: • Provides timely, in-depth coverage of both the reuse and recycling aspects of lithium-ion batteries • Is based on extensive simulation and experimental research performed by the author, as well as an extensive review of the current literature on the subject • Discusses the full range of critical issues, from battery dismantling and sorting to secondary pollution control and zero emissions technologies • Includes business models and strategies for secondary use and recycling of power lithium-ion batteries Reuse and Recycling of Lithium-Ion Power Batteries is an indispensable resource for researchers, engineers, and business professionals who work in industries involved in energy storage systems and battery recycling, especially with the manufacture and use (and reuse) of lithium-ion batteries. It is also a valuable supplementary text for advanced undergraduates and postgraduate students studying energy storage, battery recycling, and battery management.

Купить

Автор: Max Altschuler

Купить

Автор: Группа авторов

Купить

Автор: Social Alliance Enterprise

From the Social Enterprise Alliance, the organization dedicated to building a robust social enterprise field, comes Succeeding at Social Enterprise. This practical guide is filled with the best practices, tools, guidance, models and successful cases for leaders (and future leaders) of social ventures and enterprises. A groundbreaking work, it brings together the knowledge and experience of social enterprise pioneers in the field and some of today's most successful social entrepreneurs to show what it takes to implement and run an effective social venture or organization. Succeeding at Social Enterprise focuses on real life examples, lessons learned and the core competencies that are needed to run a social venture in a nonprofit, highlighting such skills as managing and leading, business planning, marketing and sales, and accounting. Praise for Succeeding at Social Enterprise «This is a must read for anyone starting or growing a social enterprise. The lessons learned offer valuable, practical and real insights from pioneers in the field. The frameworks and tools presented can be implemented immediately to help drive success and expand your social impact.» —Kriss Deiglmeier, executive director, Center for Social Innovation, Stanford Graduate School of Business «By successfully weaving together the best thinking and advice from a diverse set of our field's leading experts and practitioners, Succeeding at Social Enterprise will be the new 'must have' handbook for Social Enterprise.» —Jed Emerson, www.BlendedValue.org «This is a timely book needed for a movement that's taking off. The leading thinkers and top practitioners in this book make today's pressing issues clear to both the novice and the experienced social entrepreneur.» —Kevin Jones, founding principal, Good Capital «Written by the nation's leading experts on starting, building and leading a successful social venture, this book is a profoundly important contribution to the growing body of literature on social entrepreneurship. No other book brings to bear this kind of business experience, practical advice and wisdom on the challenges of creating and sustaining a social enterprise.» —David Roll, founder, Lex Mundi Pro Bono Foundation

Купить

Автор: Rafael Luque

Highlighting sustainable catalytic processes in synthetic organic chemistry and industry, this useful guide places special emphasis on catalytic reactions carried out at room temperature. It describes the fundamentals, summarizes key advances, and covers applications in industrial processes in the field of energy generation from renewables, food science, and pollution control. Throughout, the latest research from various disciplines is combined, such as homogeneous and heterogeneous catalysis, biocatalysis, and photocatalysis. The book concludes with a chapter on future trends and energy challenges for the latter half of the 21st century. With its multidisciplinary approach this is an essential reference for academic and industrial researchers in catalysis science aiming to design more sustainable and energy-efficient processes.

Купить

Автор: Edward Nakauchi M

The Keep It Simple (KISS) philosophy is the primary focus of this book. It is written in very simple language with minimal math, as a compilation of helpful EMI troubleshooting hints. Its light-hearted tone is at odds with the extreme seriousness of most engineering reference works that become boring after a few pages. This text tells engineers what to do and how to do it. Only a basic knowledge of math, electronics, and a basic understanding of EMI/EMC are necessary to understand the concepts and circuits described. Once EMC troubleshooting is demystified, readers learn there are quick and simple techniques to solve complicated problems a key aspect of this book. Simple and inexpensive methods to resolve EMI issues are discussed to help generate unique ideas and methods for developing additional diagnostic tools and measurement procedures. An appendix on how to build probes is included. It can be a fun activity, even humorous at times with bizarre techniques (i.e., the sticky finger probe).

Купить

Автор: Najeeb Jan A

'An urgent and extraordinary book. Weaving a philosophical analysis of Heidegger, Agamben and Foucault, Jan draws out the implications of their thought for a radical analysis of the ontological politics of Islam and Pakistan. Whether writing about the 'Ulama and Deoband schools, blasphemy laws, the military, beards, or the Bamiyan Buddhas, Jan provokes and challenges our thinking while unearthing the ground on which Pakistan—and our world—are built.' —Joel Wainwright, Department of Geography, Ohio State University, USA 'In this exceptionally inventive and important book, Jan shows us that the problems besetting political life in Pakistan are part of a more troubling crisis in modern forms of power. Challenging accounts that cordon off «political Islam» from «the West,» Jan discloses their fundamental indistinction and thus, through his practice of critical ontology, reorients our understanding of how power and violence are at work in the world.' —Joshua Barkan, Department of Geography, University of Georgia, USA The Metacolonial State presents a novel rethinking of the relationship between Islam and the Political. Key to the text is an original argument regarding the «biopoliticization of Islam» and the imperative need for understanding sovereign power and the state of exception in resolutely ontological terms. Through the formulation of a critical ontology of political violence, The Metacolonial State endeavors to shed new light on the signatures of power undergirding postcolonial life, while situating Pakistan as a paradigmatic site for reflection on the nature of modernity's precarious present. The cross-disciplinary approach of Dr. Jan's work is certain to have broad appeal among geographers, historians, anthropologists, postcolonial theorists, and political scientists, among others. At the same time, his explication of critical ontology – with its radical reading of the interlacement of history, power and the event – promises to add a bold new dimension to social science research on Islamism and biopolitics.

Купить

Автор: Francois Grosjean

Купить

Автор: Julian Baggini

A new edition of the bestselling guide to the study of philosophy: the ideal intellectual ‘toolkit’ for sharpening analytical skills and building philosophical acuity Whether used as a guide to basic principles or a resource for key concepts and methods,  The Philosopher's Toolkit  equips readers with all the intellectual ‘tools’ necessary for engaging closely with philosophical argument and developing fluency in the methods and language of philosophical inquiry. Featuring accessible explanations, practical examples, and expert guidance, this text empowers readers to understand traditional philosophical thinking and to engage with new ideas. Focuses on the practical methods and concepts necessary for philosophical inquiry Presents a versatile resource for both novice and advanced students in areas of philosophy, critical theory, and rhetoric Adopts a pluralistic approach to teaching philosophy, making this a suitable resource for many courses Delivers extensive cross-referenced entries, recommended readings, and updated online resources Covers an array of topics, from basic tools of argumentation to sophisticated philosophical principles Fully revised and updated to include new topics and entries as well as expanded recommended reading lists to encourage further study

Купить

Автор: Detlef Stolten

In this ready reference, top academic researchers, industry players and government officers join forces to develop commercial concepts for the transition from current nuclear or fossil fuel-based energy to renewable energy systems within a limited time span. They take into account the latest science and technology, including an analysis of the feasibility and impact on the environment, economy and society. In so doing, they discuss such complex topics as electrical and gas grids, fossil power plants and energy storage technologies. The contributions also include robust, conceivable and breakthrough technologies that will be viable and implementable by 2020.

Купить

Автор: Melike Erol-Kantarci

With the increasing worldwide trend in population migration into urban centers, we are beginning to see the emergence of the kinds of mega-cities which were once the stuff of science fiction. It is clear to most urban planners and developers that accommodating the needs of the tens of millions of inhabitants of those megalopolises in an orderly and uninterrupted manner will require the seamless integration of and real-time monitoring and response services for public utilities and transportation systems. Part speculative look into the future of the world’s urban centers, part technical blueprint, this visionary book helps lay the groundwork for the communication networks and services on which tomorrow’s “smart cities” will run. Written by a uniquely well-qualified author team, this book provides detailed insights into the technical requirements for the wireless sensor and actuator networks required to make smart cities a reality.

Купить

Автор: Donald Meuten J

Купить

Автор: Torria Davis

Update the visual design of your course in pedagogically sound ways Visual Design for Online Learning spotlights the role that visual elements play in the online learning environment. Written for both new and experienced instructors, the book guides you in adding pedagogically relevant visual design elements that contribute to effective learning practices. The text builds upon three conceptual frameworks: active learning, multiple intelligences, and universal design for learning. This resource explores critical issues such as copyright, technology tools, and accessibility and includes examples from top Blackboard practitioners which are applicable to any LMS. Ultimately, the author guides you in developing effective visual elements that will support your teaching goals while reinforcing the learning materials you share with your students. There has been a steady increase of over 10% in online enrollment for higher education institutions since 2002, yet the visual look of online courses has not changed significantly in the last ten years. Adapting to the needs of students within online classes is critical to guiding your students toward success—and the right visual elements can play an integral role in your students' ability to learn and retain the information they need to thrive in their chosen programs. In fact, visual elements have been shown to increase student participation, engagement, and success in an online course. Leverage the best practices employed by exemplary Blackboard practitioners Explore three foundational conceptual frameworks: active learning, multiple intelligences, and universal design for learning Increase student retention and success Visual Design for Online Learning is an essential reference for all online educators—both new and experienced.

Купить

Автор: Deborah Greaves

A comprehensive text covering all aspects of wave and tidal energy Wave and Tidal Energy provides a comprehensive and self-contained review of the developing marine renewable energy sector, drawing from the latest research and from the experience of device testing. The book has a twofold objective: to provide an overview of wave and tidal energy suitable for newcomers to the field and to serve as a reference text for advanced study and practice. Including detail on key issues such as resource characterisation, wave and tidal technology, power systems, numerical and physical modelling, environmental impact and policy. The book also includes an up-to-date review of developments worldwide and case studies of selected projects. Key features: A comprehensive and self-contained text covering all aspects of the multidisciplinary fields of wave and tidal energy. Draws upon the latest research in wave and tidal energy and the experience of leading practitioners in numerical and laboratory modelling. Regional developments worldwide are reviewed and representative projects are presented as case studies. Wave and Tidal Energy is an invaluable resource to a wide range of readers, from engineering students to technical managers and policymakers to postgraduate students and researchers.

Купить

Автор: Victor M. Lyatkher

An up-to-date and thorough treatment of the technologies, practical applications, and future of wind power, with the pros and cons and technical intricacies of various types of wind turbines and wind power prediction With the demand for energy outstripping availability from conventional sources such as fossil fuels, new sources of energy must be found. Wind power is the most mature of all of the renewable or alternative sources of energy being widely used today. With many old wind turbines becoming obsolete or in need of replacement, new methods and materials for building turbines are constantly being sought after, and troubleshooting, from an engineering perspective, is paramount to the operational efficiency of turbines currently in use. Wind Power: Turbine Design, Selection, and Optimization: Details the technical attributes of various types of wind turbines, including new collinear windmills, orthogonal windmills, non-vibration VAWT wind turbines, and others Covers all the updated protocols for wind power and its applications Offers a thorough explanation of the current and future state of wind power Is suitable not only as a reference for the engineer working with wind power but as a textbook for graduate students, postdoctoral students, and researchers Wind power is one of the fastest-growing, oldest, and «greenest» of the major sources of renewable energy that has been developed, with more efficient and cost-effective technologies and materials now constantly being sought for turbines and the equipment used with them. Here is a comprehensive and thorough review of the engineering pros and cons of using different kinds of wind turbines in different environments, including offshore. With full technical knowledge, engineers, managers, and other decision-makers in the wind energy industry can make more informed decisions about increasing capacity, cost-efficiency, and equipment longevity. Covering the various types of wind turbines available, such as new collinear windmills, orthogonal turbines, and others, this highly technical treatment of wind turbines offers engineers, students, and researchers insight into the practical applications of these turbines and their potential for maximum efficiency.

Купить

Автор: Группа авторов

Купить

Автор: Jay Moon

Drei Unsterbliche springen in einen Vulkan. Ob das gut geht? Die Uhr tickt, denn der unsterbliche Tag hat bald ein Ende. Wer wird ?berleben und die Million Dollar mit nachhause nehmen?

Исполнители: Alex Bolte

Купить